Reducing pollution from oil production
Although the percentage of gas from oil production that is vented or burned off rather than captured has decreased over the past few years, the total volume is still considerable. Operations in the Northwest’s Bakken Formation, one of the largest oil reservoirs in the U.S., flares and vents an estimated 250 million standard cubic feet of natural gas per day. Oil production in Texas’ Eagle Ford formation flares and vents nearly 100 million standard cubic feet per day. Environmentalists and others have called for oil companies to capture the gas, which could be used to generate power or recover even more oil, rather than burn it off or release it into the atmosphere. But the infrastructure to do this hasn’t caught up with the rapid growth of oil production. Milind Deo and colleagues set out to design a better facility for handling gas associated with oil operations.
The researchers investigated the application of staged separation, using a high-pressure step followed by a lower-pressure one, and demonstrated that this could reduce the rates of venting and flaring by up to 70 percent. The concept of staged separation has been used in production from conventional oil reservoirs, but has not been widely applied in the production of liquids from shale formations. Upfront costs would be higher than separating oil and gas in one step, but in the long run, the cuts in waste gas would result in a more sustainable process, the researchers say.
The authors acknowledge funding from an industry consortium at the Energy and Geosciences Institute at the University of Utah.
The American Chemical Society is a nonprofit organization chartered by the U.S. Congress. With nearly 157,000 members, ACS is the world’s largest scientific society and a global leader in providing access to chemistry-related research through its multiple databases, peer-reviewed journals and scientific conferences. Its main offices are in Washington, D.C., and Columbus, Ohio.
To automatically receive news releases from the American Chemical Society, contact firstname.lastname@example.org.